← Back to writing
Steel TalkDeep dive

Reclaim your edge: what every knife owner should know about edge stability

重拾你的刀鋒:每位刀主都該知道的刃口穩定度

Edge stability is a blade's resistance to chipping, rolling and deformation. Our testing says geometry and micro bevels decide it far more than the name stamped on the steel.

Many assume the secret to a sharp knife lies in the steel. The reality is more nuanced. A knife's edge stability, its resistance to chipping, rolling or deformation, plays a critical role in performance.

Metallurgist Roman Landes was among the first to explore the concept in depth, in Messerklingen und Stahl (2006). His research, later refined and popularised by Cliff Stamp, who also brought the micro bevel into the conversation, transformed how the community understands edge performance.

What edge stability is

Landes described it as a blade's ability to maintain apex integrity, the very tip of the cutting edge, under cutting forces. A stable edge resists chipping, rolling and excessive wear.

The CATRA misconception

A high CATRA score is widely read as a guarantee of edge retention. CATRA primarily measures abrasive wear resistance, and doesn't necessarily reflect real-world performance, particularly on hard materials.

Knife Steel Nerds

Geometry, and the micro bevel

Dr Larrin Thomas has shown that optimising blade geometry improves both CATRA performance and real cutting efficiency: reducing the edge angle from 50° to 34° increases total cutting length roughly 2.5 times.

Knife Steel Nerds

Knife Steel Nerds

Building on Stamp's work, the micro bevel is a secondary bevel set slightly higher than the primary edge. It improves stability substantially, and woodworkers used it long before power tools.

Carbides

Steels rich in large carbides usually deliver robust wear resistance but reduced toughness; low-carbide steels are tougher but wear faster. Landes found that steels with fine, evenly distributed carbides (52100, the CPM steels) sustain lower edge angles, while coarse-carbide steels like conventional ATS-34 need more obtuse angles to avoid chipping.

Setting up the test

  • Primary bevel: fixed-angle sharpener, finished at 320 grit for a uniform bevel.
  • Micro bevel: Spyderco Sharpmaker with a custom jig, medium to fine rods, then two light passes on a green-compound strop to avoid rounding the apex.
  • Medium: FAS Grade A spruce, restricted to 1 inch of blade length to replicate a push-cut planing action rather than a slice.
  • Inspection: every 50 push cuts. Spruce gives excellent feedback: when the wood finish degrades, inspect the apex. If uncertain, multiple people verify before concluding a test.

Why spruce

  • Availability: widely obtainable in most countries.
  • Consistency: FAS Grade A has minimal knots and uniform grain, which cuts variables and gives clear feedback.
  • Influence: Cliff Stamp's testing used rope, cardboard and extensive wood carving.
  • Practicality: wood carving is a real knife task, and wood is barely abrasive, so we watch the apex under stress without wearing it away.

Baseline

  • Single-bevel baseline: 60 datasets, none exceeding 419 push cuts, averaging 74.
  • Micro bevel introduced with a Benchmade Contego (S30V) at 25° per side: 600 push cuts with no deformation, our benchmark.
  • Pass: 600 push cuts with no noticeable deformation, rolling or significant sharpness loss. At 600 the edge still push-cut newspaper.
  • Recorded per test: date, brand, steel, model, geometry angle, micro-bevel angle, total cuts, apex observations.

Results

  • Thinning behind the apex plus a micro bevel reduces cutting force and improves edge retention; the hypothesis held.
  • Geometries tested ran from 20° to 9° per side. Cutting feedback improved markedly once geometry dropped below 12° per side.
  • High-carbide steels needed ≥25° per side micro bevels to reach 600 cuts, matching Landes on carbide-rich steels.
  • CPM 154 (powder metallurgy) outperformed conventional 154CM under identical conditions.
SteelCarbide Volume (%)Tested Micro-Bevel Angle (deg/side)Result (Push-Cuts)CATRA Value
Magnacutabout 9%13°600 (no deformation)about 540 (63 HRC). Knife tested at 63± HRC.
14C28Nabout 6%15°600 (no deformation)about 410 (62 HRC). Knife tested at 59± HRC.
S30Vabout 15%17°600 (no deformation)about 560 (61 HRC). Knife tested at 59± HRC.
S30Vabout 15%25°600 (no deformation)about 560 (61 HRC). Knife tested at 59± HRC.
M390about 22%25°600 (no deformation)about 620 (61.5 HRC). Knife tested at 59± HRC.
ASP 60about 23.5%25°600 (no deformation)about 940 (68.5 HRC). Knife HRC not specified.

Micro-bevel angles in production knives

SteelCarbide Volume (%)Tested Micro-Bevel Angle (deg/side)Result (Push-Cuts)
154CMabout 17%20°600 (no deformation)
CPM-154about 17%15°600 (no deformation)
SteelFindingNote
14C28NBest at 20° per sideMarket variability suggests different heat-treatment protocols between makers
M39025° per side generally stableSome production knives stayed unstable even at 30° per side
Low-carbide steelsStable at 15–20° per sideToughness allows thinner geometry
High-carbide (M390, ASP 60)≥25° per sidePrevents premature chipping or rolling

What geometry does

Take 14C28N sharpened at 22° per side: stable apex, reliable edge. Drop to 15° per side and it's noticeably sharper, but the edge may not hold, and you'd blame the steel. Now thin the geometry to 12° per side and reinforce it with a 20° micro bevel: sharper and longer lasting. If you didn't know about the modification and the knife went a month without resharpening, you'd conclude the steel was exceptional.

TL;DR

  • Geometry drives performance. A thinner secondary bevel plus a micro bevel makes a knife both sharper and stronger; 50° to 34° gave 2.5× the CATRA cutting length.
  • CATRA mainly measures wear resistance. Real cutting involves twisting and lateral stress; carbide size, volume and distribution matter as much as hardness or CATRA score.
  • Some very apex-stable steels (MagnaCut, 5160) don't score well on CATRA.
  • Powder metallurgy beats conventional at the same geometry (CPM 154 over 154CM).
  • Heat treatment varies by maker, so required micro-bevel angles vary; some M390 was unstable at 30° per side.
  • Composition sets the potential; geometry and execution set the result.

Who it's for

  • Readers who want methodology and raw numbers.
  • Sharpeners deciding a micro-bevel angle for a specific steel.
  • Anyone who suspects CATRA scores don't match their own experience.

Who it's not for

  • Anyone looking for a steel ranking.
  • Readers who haven't met the terms BTE or DPS yet; start with the Sharpmaker review.
Specs at a glance
Duration3 years, 200+ individual cut tests
SteelsAt least 58
Total cuts43,470 wood-planing cuts
MediumFAS Grade A spruce (Picea asperata), 1 inch of edge
Pass mark600 push cuts with no observable apex deformation

The verdict

Steel composition sets the potential; geometry and execution decide the performance. Thin the bevel, add the right micro bevel for the carbide content, and an ordinary steel will outlast a premium one ground badly.

Comments · 26

  • Miaorew2026.10.27

    Our library is hosting a small clothing swap, and I am preparing an optional discussion about choosing colors from the available donations. The activity should stay accessible to visitors with no previous interest in fashion. Some visitors enjoy fashion discussions, whereas others mainly want useful clothes in their size. I hope a brief conversation could encourage people to try something outside their usual choices. Someone proposed seasonal signs for the tables, although the categories may confuse new visitors. For background, I have been reading about <a href=https://hairdye.top>personal color analysis</a> and would like to introduce the vocabulary without presenting it as a set of rules. There will be mirrors, but we cannot offer private consultations or individual assessments. An open question about two contrasting garments might work better than a formal sorting system. How would you phrase an invitation that encourages experimentation while respecting each person's preferences?

  • Ameliases2026.10.27

    Would a simple comparison station help visitors see how scarf colors affect a portrait? Our library is planning a portrait display, and visitors may choose a scarf before sitting for a photograph. My aim is a friendly comparison rather than a verdict about which colors someone is allowed to wear. One idea is to compare softer and brighter scarves against the same background without changing the camera setup. What gives me pause is finding useful language that does not turn personal taste into a mistake. Could we start by asking where the eye goes in each photograph, leaving seasonal names until later? I have been reading about <a href=https://bodytypes.top>personal color analysis</a> though practical experience with a community activity would be more useful than another rigid list of rules. How would you frame the exercise so visitors leave with observations they can use rather than a fixed label?

  • MiaOr2026.10.28

    I need to hand a demo recording to an editor working remotely. There is a texture I want them to assess, but describing it as strange or metallic feels too vague to be useful. I would rather send a precise observation than prescribe a fix. I would begin with the exact filename and revision date. I would include timestamps covering the part that needs attention. I came across <a href=https://musicartifactfix.top>suno shimmer</a> as a possible term while reading about generated audio, although I am not sure it fits this particular sound. The note should separate observation from interpretation. The headphones or speakers used could be recorded in the note. I would send the untouched source alongside the short example. The first handover should leave room for the editor's own assessment. What would you need before assessing this audio issue?

  • LucyBync2026.10.28

    The same saved music export sounds rather fizzy on my travel headphones. On the desk speakers I barely notice the passage, although the room is not particularly quiet. I do not want to edit the file prematurely. The file is identical in both cases; I have not made a second encode or downloaded another version. A search brought me to <a href=https://musicartifactcleaner.top>ai audio artifact removal</a> but I would like to rule out the playback chain before treating this as a repair problem. I will start by checking the playback equalizer. Next I can listen again at comparable volumes. Would borrowing another pair of headphones tell me more than inspecting a picture of the sound? I could repeat the check in another player. Finding the source of the difference comes first. How would you order the remaining checks?

  • NoraCrem2026.10.30

    We're comparing apartments for a short family trip to Tenerife and keep coming back to Playa de las Americas. The area looks convenient, but listings that appear similar can be very different once I look at their exact location. I started with <a href=https://tenerifeholiday.top>are there any holiday rentals available in playa de las americas, canary islands, spain?</a> and found plenty of results, so availability alone doesn't help us choose. We would like an easy walk for meals, a practical route to the beach, and a place where evenings aren't dominated by noise. The photos rarely show the route from the building to the promenade or whether the bedroom faces a busy street. I'm already looking at recent guest comments, the exact map pin, and whether the stated sleeping arrangements really work for our group. Should I confirm directly about street-facing rooms and late-evening noise before paying, or is there another detail visitors often miss? A car is only a possibility for day trips so a manageable uphill return matters more to us than a slightly better view. I'd welcome advice about which nearby streets feel calmer while still being convenient for a family arriving after a flight. If you know the area well, what checks helped you avoid a poor fit, and which listing details turned out to matter most in practice?

  • Ameliarob2026.10.30

    I am making a practice track for a dance class with spoken counts over generated instrumental backing. There is an audible buzz in the introduction near the cue for the first movement. Reliable counts and audible rhythmic markers matter most because people will use this to practise a sequence. I encountered <a href=https://removeaudioartifacts.top>remove suno artifacts</a> while researching the buzz, and I want to evaluate any processing against that practical requirement. Before testing a processed copy, I want to define what would actually make it more useful in class. Would a complete phrase following the spoken counts provide a useful test at ordinary class volume? The recorded counts can remain unchanged while I compare different versions of the instrumental layer. The check would include the downbeat and sharp rhythmic cues, rather than focusing only on the buzzing. Which timing change would make you reject a processed version even if its background sounded cleaner?

  • EmilyTew2026.11.01

    I need to record a short training course for work. The company backdrop is a fairly strong teal. I can choose my clothes, but replacing the background is outside my part of the project. I own a cream shirt, a navy shirt, and a muted red one. Using something I already own would be my first choice. The room, microphone position, and lighting will stay the same throughout the course. I can make these comparison clips before the scheduled recording day, so there is time to adjust my choice without delaying anyone. I found a <a href=https://colorpaletteanalysis.top>personal color analysis</a> page while looking for language to describe the differences. I am unsure how much a personal palette tells me about this particular setup. Would recording the same short introduction in each shirt be a sensible test? Someone else could look for distracting color clashes in the footage. What should I evaluate separately when judging how my face looks?

  • EllaCap2026.11.01

    I am choosing where to stay in southern Tenerife for a summer break, and the descriptions of the resort areas are starting to blur together. What matters most to me is somewhere I can walk to the sea in the morning and still find a calm place to eat in the evening. I do not need nightlife, but I also do not want to depend on a car for every meal or short walk. I have been reading about <a href=https://tenerifeguide.top>beaches in tenerife south</a> and now I am trying to separate the beach itself from the feel of the streets around it. Several locations look close to everything, yet reviews suggest that a short distance can still involve steep roads or traffic. I would rather choose a practical base than spend each day travelling across the island to find a quieter stretch of sand. Where would you start looking for a solo traveller who likes swimming, coastal walks, and early evenings? I can take a bus or taxi for occasional excursions, so perfect access to every attraction is not necessary. Advice about the streets behind the beach would be useful, especially from someone who has stayed nearby. I would love to hear what daily life there actually feels like.

  • DiegoJaf2026.11.01

    Antes de recorrer Palma a pie intento ubicar el antiguo barrio judio y encajarlo en una manana sin demasiadas paradas. Mi problema no es llegar a la ciudad, sino identificar una entrada al recorrido que tenga sentido desde el centro. Las distancias sobre el plano son pequenas, pero quisiera dejar margen para orientarme y detenerme a observar el entorno. Al final de la manana nos esperan en otro lugar, por lo que queremos mantener una ruta facil de acortar. Quiero leer algo de contexto antes de ir, para no atribuir automaticamente una historia concreta a cualquier calle antigua. No necesitamos verlo todo en una manana; nos interesa mas comprender unas pocas referencias y caminar con tiempo para observarlas con calma. Como primera ayuda para situar la zona estoy consultando esto: <a href=https://excursionesmallorca.top>barrio judio palma como llegar</a> ?Que referencias claras utilizariais para entrar en la zona y mantener una orientacion sencilla durante la caminata? Si recomendais algun interior, me vendria bien distinguirlo del paseo por las calles y confirmar sus condiciones por separado.

  • EllaRock2026.11.05

    For an upcoming paper mask workshop, I want the planning stage to account for the different outlines of participants’ faces. Starting with a single outline saves time, yet it leaves us guessing about where each person might need a different contour. I am considering a short explanation of <a href=https://squarefaceshape.top>face shapes</a> as background for that worksheet. The shape name would be a discussion aid, while the dimensions for each mask would still come from the wearer. We could note the widest part of the face and the jaw outline before deciding which template edges to redraw. A plain paper fitting would come before the decorative stage, allowing participants to redraw edges while adjustments are still straightforward. There should be room for mixed features, rather than pressure to choose the closest category and follow its outline exactly. A dramatic character outline is fine for the finished piece, provided the practical fitting stage remains separate from those decorative choices. What would you include on that planning sheet to make the first fitting easier without turning the workshop into a classification lesson?

  • EmilyEl2026.11.05

    I am helping prepare an adult learning session about automated face categories. The goal is to ask better questions about classifications without ranking anyone’s appearance. A topic reference I have saved for discussion is <a href=https://findmyfaceshape.top>what is my face shape</a> to introduce the subject. That inclusion would not imply that its results are accurate. The first activity would ask participants what outline features a classification might consider. We could then identify what the photograph does not show clearly enough to judge. I would avoid requiring personal uploads and use written example descriptions for the exercise. Each group could explain which evidence would change its initial interpretation. We could also compare two written descriptions of the same outline and ask whether their labels mean the same thing. This would make the assumptions available for discussion without requiring a supposedly correct personal result. How would you keep the conversation focused on evidence and uncertainty throughout the session?

  • Chloeoi2026.11.06

    I am preparing facial outline studies for a drawing class and need some clear labels. Oval and oblong are the two descriptions I find hardest to separate in a simplified sketch. My aim is to record the proportions I see, without treating any outline as the ideal. I have <a href=https://ovalfaceshape.top>oval face shape</a> on my reading list for the terminology. Would you start by locating the broadest part before deciding how to describe the overall outline? There is room for a few guide marks, though I do not want them to overwhelm the sketch. The category should leave room for individual details around the forehead, cheekbones, and jaw. A sketch with clear explanatory notes would be more helpful to me than a famous face comparison. The assignment asks for a reasoned description, so simply writing a category name will not be enough. How do you keep the description useful when the sketch does not fit one category neatly?

Real experience only. No affiliate links.